DENALI 2.0 CANsmart Plug-N-Play Controller For Harley-Davidson Motorcycles

DENALI 2.0 CANsmart Plug-N-Play Controller For Harley-Davidson Motorcycles
DENALI 2.0 CANsmart Plug-N-Play Controller For Harley-Davidson Motorcycles
DENALI 2.0 CANsmart Plug-N-Play Controller For Harley-Davidson Motorcycles

DENALI 2.0 CANsmart Plug-N-Play Controller For Harley-Davidson Motorcycles

DENALI 2.0 CANsmart Plug-N-Play Controller For Harley-Davidson Motorcycles Harness the flexibility and intelligence of your Harley-Davidson's CANbus electrical system to make installation of accessories drastically easier with the DENALI CANsmart Controller. The ground-breaking Harley-Davidson CANbus controller provides plug & play connection and intelligent control of aftermarket and genuine Harley-Davidson accessories right from your bike's original switches or DENALI Accessory Manager Software. Simply connect the CANsmart Controller to your Harley-Davidson diagnostic port to access over 35 programmable accessory settings that provide intelligent control of factory passing lamps, auxiliary lights, horns, brake lights, or any other accessory you can imagine.

The four accessory circuits are electronically fused and can provide up to 25 peak amps (10 amps continuous). The CANsmart H-D is compatible with over 60 Harley-Davidson models including all Sportster, Dyna, Softail, Touring, CVO, and Trike models from 2014 to present. Set passing lamps and auxiliary lights to switch between a programmable high/low setting with the factory high beam switch.

Independently control two sets of lights on/off and intensity level (for both day and night) right from your bikes factory trip switch. Set passing lamps or auxiliary lights to modulate to increase your visibility to other motorists. Need to get someone's attention?

Pulse your high beam switch three times and your auxiliary lights will strobe three times fast. This feature cancels the corresponding auxiliary light when you turn your turn signal on preventing powerful auxiliary lights from overpowering your signal Plug & Play Horn Installation. Quickly and easily connect high power aftermarket horns like our SoundBomb without having to add an additional harness or relay.

With this feature selected the CANsmart will automatically strobe your passing lamps or auxiliary lights when you sound your horn. This feature works whether you have the factory horn or SoundBomb horn installed. Deceleration Activated "Smart Brake" Technology. The CANsmart reads vehicle speed in real time to activate your brake light during deceleration before you even touch the bake. You can adjust the sensitivity and minimum speed at which the Smart Brake Feature will activate.

The CANsmart provides four different flash patterns that make our super bright auxiliary brake lights even noticeable to motorists behind you. You can set auxiliary brake lights to only flash under hard braking, flash continuously as your brake is applied or flash four times rapidly then hold steady (California legal flash rate).

Compatible with Genuine Harley-Davidson Accessories. The CANsmart can provide "smart brake" and flash pattern braking to a wide variety of accessories including Harley-Davidson aftermarket LED brake lights. The CANsmart provides a universal "accessory" option which simply gives you clean switched 12V power. That means whatever accessory you connect to this circuit will turn on and off with your ignition. You can also set the accessories on this circuit to have a delayed time out.

This will keep them powered for up to 30 seconds after your turn off your bike. (1) CANsmart Controller (2) 5.5ft Light Extension Cables (2) OEM Passing Lamp Wiring Adapters 5ft SoundBomb Horn Extension Cable B6 Brake Like Wiring Adapter Zip-ties Adhesive Hook-and-Loop Fastener Micro USB Programming Cable CANsmart Accessory Manager Software Note: When choosing DENALI 2.0 LED Auxiliary Lights for use with the CANsmart system, be sure to order only the light pods themselves. With the CANsmart, the cabling and relay set included in the full kits is not necessary. You can find the DENALI pods here: D4, D2, DM, DR1, D7, and S4. APPLICATION DETAILS ARE FOR UK SPECIFICATION MOTORCYCLES, IT IS THE BUYERS RESPONSIBILITY TO ENSURE THE SPECIFICATION OF THE MODEL FROM NON-UK COUNTRIES IS THE SAME AS A UK APPLICATION.

As with all aftermarket products sometimes small modifications can be required to fit some products. Photographs are for illustrative purposes only and shades may vary across computer monitors.

It is recommended that a competent mechanic fit these products. A note to our customers- we do run a very busy retail showroom & a motorcycle training school which is open 7 days a week. We cannot estimate when these charges will be applied, how much they will come to if applied and we regret that we cannot pay these charges. Please always read the instructions provided with the product before using/fitting. DIRCT accepts no liability for inaccuracies or misstatements about products by manufacturers or other third parties. This does not affect your statutory rights. The item "DENALI 2.0 CANsmart Plug-N-Play Controller For Harley-Davidson Motorcycles" is in sale since Tuesday, July 30, 2019.

This item is in the category "Vehicle Parts & Accessories\Motorcycle Accessories\Other Motorcycle Accessories".dirct" and is located in Neath. This item can be shipped to United Kingdom.